Samsung WF45T6000AW 4C Error Code – Washer Not Filling With Water
The 4C error code on the Samsung WF45T6000AW washing machine indicates a problem with the water supply. This error typically appears when the washer cannot fill with water within the expected time during the wash cycle.
Common Symptoms
- Washer stops shortly after starting
- 4C error appears on display
- No water entering washer drum
- Wash cycle will not begin
Most Likely Causes
- Closed or partially closed water supply valves
- Clogged water inlet valve screens
- Low household water pressure
- Faulty water inlet valve
How to Fix the 4C Error
1. Check Water Supply
Make sure both hot and cold water supply valves behind the washer are fully open.
2. Inspect Inlet Hoses
Remove the hoses and inspect the small mesh screens inside the inlet valve for debris.
3. Test the Water Inlet Valve
If the washer still will not fill, the inlet valve solenoid may be defective.
Related Replacement Parts
FAQ
Can low water pressure cause the 4C error?
Yes. Samsung washers require sufficient water pressure to begin the wash cycle.
Do I need to replace the inlet valve immediately?
Always check hoses and screens first before replacing the valve.
