Maytag Washer Not Draining – Complete Troubleshooting Guide
If your Maytag washer is not draining, water may remain inside the drum after the wash cycle finishes. This issue prevents the washer from entering the spin cycle and can leave clothes soaking wet.
Drain problems are usually caused by a clogged pump filter, blocked hose, or a failing drain pump motor.
Common Symptoms
- Water remaining inside the washer drum
- Spin cycle will not start
- Washer stops mid-cycle
- Drain pump humming but not moving water
Most Common Causes
- Clogged drain pump filter
- Blocked drain hose
- Faulty drain pump
- Foreign objects inside pump housing
Step-by-Step Troubleshooting
Check the Drain Pump Filter
The pump filter collects debris such as lint, coins, and small objects. Cleaning this filter often restores proper drainage.
Inspect the Drain Hose
Ensure the hose is not kinked or clogged.
Test the Drain Pump
If the pump hums but does not move water, the pump motor may be defective.
Replacement Parts
FAQ
Can small objects cause drain failure?
Yes. Coins, buttons, and hair pins frequently clog the drain pump filter.
